Reference Guide

292
Arranging and editing
Arranging Tracks
or hide any combination of tracks, and revert back to previous display settings. The following table
lists each of these commands and provides an explanation of each:
To Lock or Unlock the Height of a Track
1. Right-click an empty area in one of the desired track’s controls to display the Track pane context
menu.
2. Choose Lock Height from the menu.
When a track is locked, the Maximize Strip button in the track appears filled-in:
Command Description Shortcut
Show and Fit Selection This command hides all tracks which are not selected. The
remaining tracks are adjusted in size vertically and horizontally to fit
in the Track view, without scrolling if possible. All track selections
are lost after this command is executed.
SHIFT+S
Fit Tracks to Window All currently displayed tracks are adjusted in size vertically to fit in
the Track view, without scrolling if possible.
F
Fit Project to Window This command resizes all tracks both vertically and horizontally to
fit in the Tracks view.
SHIFT+F
Lock Height This command maintains the track’s height when you use a zoom
or fit command. See “To Lock or Unlock the Height of a Track” on
page 292.
n/a
Show Only Selected
Tracks
This command hides all tracks which are not selected. The
remaining tracks are adjusted in size vertically.
H
Hide Selected Tracks Hides all selected tracks. SHIFT+H
Show All Tracks Shows all tracks in your project, including these hidden using the
Track Manager.
A
Track Manager Opens the Track Manager dialog. For more information about the
Track Manager dialog, see Track Manager dialog.
M
Undo View Change This command restores the view to its previous state. There are up
to 16 levels of undo.
U
Redo View Change This command restores the view to the state prior to the Undo View
Change command.
SHIFT+U
Vertical FX Bins Changes track FX bins from vertical position into horizontal FX
fields located with other track property fields.
n/a
Table 56.