Reference Guide

331

Clip Muting and Isolating (Clip Soloing)

Arranging and editing

A. Muted area of clip

To Unmute a Time Range Using Default Style

1. Make sure that Mute Time Ranges under Click+Drag Behavior in the Mute tool drop-down

menu has a check mark.

2. Using the Mute tool, click inside the upper half of a clip in the muted area.

To Mute or Unmute an Entire Clip Using Default Style

1. Make sure that Mute Time Ranges under Click+Drag Behavior in the Mute tool drop-down

menu has a check mark.

2. Using the Mute tool, ALT-click anywhere in the clip (hold down the ALT key while you click).

When a clip is currently muted, SONAR displays the Mute icon in the upper left corner of the clip.

A. Mute icon

See:

Note: If the clip you’re muting or unmuting with this method already has one or more muted

time ranges, these time ranges remain muted while you ALT-click the clip, so you don’t lose any

precise mute edits you’ve performed. To completely unmute the clip in the picture below, first

ALT-click the clip to remove the Mute icon, and then drag through the upper half of the clip in the

muted area(s).