Reference Guide

401

General editing

AudioSnap

A. Crossfades

7. Where the gaps were between clips, we now see crossfades. The default length of the crossfade

is 20 milliseconds, but you can change that by entering a number in the XFade <number goes

here> ms field in the dialog.

8. If you don’t want wide gaps to be filled in, you can enter a number of up to 200 milliseconds in the

Max Gap field. Any gap that is wider than the number in this field will not be filled in.

If we wanted to drag the clips to new locations instead of quantizing them, we could fix any resulting

gaps by selecting the clips that have gaps, and using the Process > Fade Selected Clips

command.

The Fade Selected Clips dialog has the Fill Gaps, XFade between Audio Clips radio button, the

XFade <number goes here> ms field, and the Max Gap field.

Figure 75. The Fade Selected Clips dialog

To fill in gaps with the Fade Selected Clips command

1. Select the clips that have gaps you want to fill.

2. Use the Process > Fade Selected Clips command to open the Fade Selected Clips dialog.