Reference Guide

463
Flexible Piano Roll tools
Editing MIDI Events and Continuous Controllers (CC)
The PRV Tool Configuration dialog appears.
2. In the Tools combobox, choose the Piano Roll tool you wish to assign (PRV Tool 1, PRV Tool 2 or
PRV Tool 3).
3. Do one of the following:
• Hold down the key(s) you wish to use (if any) and click with the desired mouse button directly
on a context (mouse location) in the diagram. The appropriate Key and Mouse Button check
boxes and radio buttons will be automatically checked.
• In the diagram, click on one of the seven contexts (mouse locations) you wish to assign, then
select the Mouse Button and Key settings you wish to use.
The clicked mouse location is indicated in the diagram and the Mouse Location box shows the
name of the clicked mouse location.
4. In the Tool Action combobox, select the desired action (for a description of each action, see “Tool
Action” on page 460).
5. Click OK to close the PRV Tool Configuration dialog.
See:
The PRV Tool Configuration dialog
Default PRV tool assignments
When using the default tool assignments, the ALT modifier key generally swaps the behavior of the
Draw and Select tools, allowing you to perform most common edit operations without having to
actually switch tools.
Below is a list of each tool’s default assignments.
Note: The possible actions will vary depending on the clicked mouse location.
Note: Some of the new tool actions, such as Note Split and Event Mute, are assigned by
default to the middle mouse button. If your mouse does not have a middle button, you may want
to reassign these actions to another button (see “To configure a Mouse Action” on page 462).