Reference Guide

490
Editing MIDI Events and Continuous Controllers (CC)
Changing the Timing of a Recording
To Scale Velocities
1. Select the events whose velocity data you want to change.
2. Choose Process > Scale Velocity to display the Scale Velocity dialog box.
Figure 88. The Scale Velocity dialog
3. Enter the starting and ending velocity values.
4. Check the Percentages box if the values are percentages.
5. Click OK when you are done.
SONAR alters the velocity of selected events.
Changing the Timing of a Recording
When you record a performance, there may be problems you’d like to correct. For example, the note
timing may not have been as accurate as you would like. Or, you may have recorded without using a
metronome and strayed from the tempo in one direction or another.
SONARhas two types of commands that you can use to modify the timing of a clip. The Quantize
commands alter the timing of the notes in your recording so that they fit a time grid.
The grid can have fixed time intervals or intervals that are based on some existing note pattern. The
Fit to Improvisation command, on the other hand, sets up a series of tempos that fit the material
you have recorded. Here’s a summary of when to use each type of command:
These two types of commands are discussed in the following topics.
See:
Quantizing
Fit Improvisation
Use this command To do this
Quantize Change the timing of the notes you’ve recorded to fit with the tempo of a project
Fit to Improvisation Change the tempos of a project to fit with the performance you’ve recorded
Table 89.