Reference Guide

495
Changing the Timing of a Recording
Editing MIDI Events and Continuous Controllers (CC)
Figure 90. The Groove Quantize dialog
3. Choose a groove file from the Groove File field.
4. Choose a groove pattern from the Groove Pattern field.
5. Use the following fields to configure your pattern:
6. Click Audition if you want to hear how the quantization will sound; press Stop to stop auditioning
the change.
7. Make adjustments as necessary.
8. Optionally, type a name in the Preset field (located at the top of the dialog box) and click the Save
button to save your settings.
9. Click OK when you are done.
SONAR quantizes the selected MIDI information and audio clips. You can use Undo to restore the
material to its original state. If you saved your settings, you can apply them to any pattern you want
Setting What to do
Resolution Choose a note size or enter the number of clock ticks
Window Sensitivity Enter the window sensitivity value (percentage)
If Outside Window Choose what should happen to events outside the window
Only Notes, Lyrics and Audio Check to prevent MIDI controller, aftertouch, and xRPN data from being
adjusted
Stretch Audio Check to stretch audio clips to adjust their duration
Strength Use the sliders or enter values for Note strength, Duration strength, and
Velocity strength
Table 93.