Reference Guide

514
Editing MIDI Events and Continuous Controllers (CC)
The Event List View
Editing Events and Event Parameters
Additional Event Information
Event List Buttons and Overview
Each line of the Event List view shows a single event along with all of its parameters. There are
many different types of events. All share the following parameters:
• The time of the event, displayed in SMPTE (hours:minutes:seconds:frames) format
• The time of the event, displayed in MBT (measures:beats:ticks) format
• The event type, or kind of event
The remaining parameters vary by event type. You can hide or show each kind of event by clicking
its button in the Event List toolbar or by checking its check box in the Event Manager dialog box.
Here is a summary listing of the parameters that apply to each type of event.
Short name and
display button
Type of event Parameters
Note
MIDI note Pitch (MIDI key number), velocity (0-127), duration
(beats:ticks or simply ticks), MIDI channel (1-16)
KeyAft
MIDI key aftertouch Pitch (MIDI key number), pressure amount (0-127), MIDI
channel (1-16)
Control
MIDI controller change Controller number (0-127), controller value (0-127), MIDI
channel (1-16)
Patch
MIDI patch change Bank select method, bank number, number or name of the
patch, MIDI channel (1-16)
ChanAft
MIDI channel aftertouch Pressure amount (0-127), MIDI channel (1-16)
Wheel
MIDI pitch wheel position Wheel position (-8192 to 8191, where the center is 0)
RPN
Registered Parameter
Number
Parameter number (0-16383), parameter value (0-16383),
MIDI channel (1-16)
NRPN
Non-registered Parameter
Number
Parameter number (0-16383), parameter value (0-16383),
MIDI channel (1-16)
Sysx Bank
System Exclusive data
bank
Sysx bank number (0-8191)
Sysx Data
System Exclusive data
message
Sysx message up to 255 bytes long
Tex t
Tex t Tex t
Table 99.