Reference Guide

532
Drum Maps and the Drum Grid Pane
Creating and Editing a Drum Map
note.
• Vel+. Apply a velocity offset setting to an individual mapped pitch.
• V Scale. The V Scale value sets a level of compression or expansion. A value below 100% is
compression. A value above 100% is expansion. The Vel+ setting allows for gain make-up.
Ports and Channels
This section lists each unique Port and Channel pairing. This allows you to make quick global
changes that Port and Channel pairing’s Bank and Patch settings.
See:
Working in the Drum Map Manager
Working in the Drum Map Manager
The following table lists several ways of editing settings in the Drum Map Manager.
See:
The Drum Map Manager
Creating and Editing a Drum Map
Working in the Drum Map Manager
The Map Properties Dialog
The Map Properties dialog lets you change all the settings for an individual mapped note in your
drum map. The settings in the Map Properties dialog are the same as a single row in the Drum Map
Manager. If you want to edit more than one drum note pitch mapping, click the Map Mgr button to
open the Drum Map Manager dialog.
To do this Do this
Audition a row Select the row and press SHIFT+SPACEBAR
Sort rows Drag and drop a row to a new location
Select multiple rows Click a row, hold down the CTRL key while selecting additional rows
Change the Output Port for all rows
with the same Channel/Port
Press CTRL+SHIFT while changing the port.
Undo an edit
Press the Undo button
Table 110.