Reference Guide

598
Mixing
Preparing to Mix
appearance of your meters.
For more information about metering options, see “Changing the Meters’ Display” on page 611.
To Change a Meter’s Range
• Right-click on the meter and choose a new range.
To Add a Bus
1. Right-click in the Bus pane (to add a bus at the end of the current buses) or over an existing bus
(to add a bus before it).
2. Select Insert Stereo Bus or Insert Surround Bus from the menu that appears.
A bus appears in the Bus pane.
To Delete a Bus
1. Right-click in the Bus pane over an existing bus.
2. Select Delete Bus from the menu that appears.
The bus is deleted from the Bus pane.
To Create a Bus Send in a Track
1. Right-click in an empty part of the Track pane (Track view) or a track module (Console view).
2. Select Insert Send for a list of buses available.
3. Select a bus from the list.
To Set the Snap-to Position of a Knob or Fader
1. Set the control to the desired position.
2. Right-click on the control and choose Value > Set Snap-To=Current.
From now on, the control returns to this position when double-clicked.
Option What it does
Record meters Displays record meters for any armed track.
Playback meters Displays playback meters.
Output bus meters Displays meters in buses
Table 123.
Note: If you have any track or bus routed through the bus you delete, the signal will be rerouted
to the deleted bus’s output.