Reference Guide

648
Mixing
Using V-Vocal
To Add Vibrato
1. Click the Vibrato/LFO tool.
2. Move the cursor to the place where you want the vibrato to start.
The cursor displays a vibrato icon when it is ready to add new vibrato: .
3. Drag to the right for the length of the vibrato segment that you want to add.
To Edit Vibrato
1. Move the Vibrato/LFO tool over the vibrato segment that you want to edit.
The cursor displays a double-arrow icon when it is ready to edit vibrato: .
2. Drag the vibrato segment vertically to edit amplitude, or horizontally to edit frequency.
Tips:
• Holding the CTRL key down while you drag restricts vibrato editing to amplitude only.
• Holding the SHIFT key down while you drag restricts vibrato editing to frequency only.
To Fade-in Vibrato
1. Move the Vibrato/LFO tool over the beginning of a vibrato segment.
The cursor displays a fade-in icon when it is ready to add a fade-in: .
2. Drag the vibrato segment to the right for the length of the fade-in that you want to add.
See:
V-Vocal pitch-to-MIDI.
Editing Time.
Editing Time
To edit timing with V-Vocal, the Time button in the Edit Mode section must be enabled.
To Edit Time
1. Make sure the Time button is enabled.
2. Move the Arrow tool near the vertical center of the graph until the cursor changes to the double
arrow, and click at each point where you want to preserve the original timing. A vertical green line
appears at each point that you click.
3. Now add new green lines between the existing ones.
4. Drag the new lines to the left or right to compress or expand each region.
Tips: