Reference Guide

659
Using Control Groups
Mixing
SONAR removes the control from the group and displays the control with the neutral color indicator.
To Remove All Controls from a Group
• Right-click a control in the group, and choose Clear Group from the pop-up menu.
To Override a Control’s Grouping
• Hold down the CTRL key while moving the control.
The control remains part of the group and functions as such once the CTRL key is lifted.
To Set the Group Type to Relative or Absolute
1. Right-click on any control in the group and choose Group Manager to display the Group
Manager dialog.
Figure 116. The Group Manager dialog
2. Choose Absolute or Relative as the group type and click OK.
SONAR uses the type to determine the range of motion for the group’s controls.
To Create a Custom Group
1. Right-click on any control in the group and choose Group Manager to display the Group
Manager dialog.
2. Choose Custom as the group type. The starting and ending values for each control are
displayed.
3. To change the starting or ending value for a control, click on the control in the list and enter new
values in the Start and End box.
4. To swap the starting and ending value, click the Swap button.
5. Click Close when you are done.
SONAR uses the type to determine the range of motion for the group’s controls.
To Adjust the Start Value of a Control
1. Set the control to the desired starting value.
2. Right-click on the control.