Reference Guide

694
Surround Mixing
Panning in Surround
• Press ENTER when the panner has focus.
To Change the Angle
• In either the large or small surround panner, drag the Angle and Focus marker to the left or right.
Or
• In the large surround panner, drag the Angle slider.
To Change the Focus
• In either the large or small surround panner, drag the Angle and Focus marker toward or away
from the center.
Or
• In the large surround panner, drag the Focus slider.
To Mute a Surround Speaker
• In the large surround panner, click a speaker icon to mute its output. The speaker icon turns grey
when the speaker is muted.
Or
• In the small surround panner, click a white square to mute a speaker’s output. The square turns
grey when the speaker is muted.
To Solo a Surround Speaker
• In the large surround panner, double-click a speaker icon to solo its output. The speaker icon
turns green when the speaker is soloed.
Or
• In the small surround panner, double-click a white square to solo a speaker’s output. The square
turns green when the speaker is soloed.
To Change the Width
• In the large surround panner, drag the Width slider.
To Change the Front/Rear Balance
• In the large surround panner, drag the FrntRrBl slider left to reduce front level, or right to reduce
rear level.
To Change the LFE Send Level
• In either the large or small surround panner, drag the LFE slider.
Note: Double-clicking any surround panner control will reset the control to its default value,
which for the LFE control is -INF.