Reference Guide

796
Instrument Definitions
Creating Instrument Definitions
A. There are three defined banks B. Instrument name C. The * indicates that this patch list is the default
D. This is the name of a patch name list
To Add a Bank or Change the Patch Names for a Bank
1. Drag a patch name list from the Names tree to the Patch Names for Banks folder of the
instrument you’re editing in the Instrument tree.
2. Enter a bank number, or enter -1 to indicate that this list of patch names should be used as the
default.
SONAR displays the updated banks and patch name lists. If necessary, SONAR adds a new bank to
the instrument definition.
To Remove a Bank or Patch Name List
1. In the Instrument tree in the Patch Names for Banks folder of the instrument you’re editing,
highlight the bank and patch names list.
2. Press the DELETE key, or right-click on the bank name and choose Delete from the pop-up
menu.
To Set or Clear the Drum Flag
• Right-click on the bank in the Instrument tree, and choose Drums from the pop-up menu.
See also:
Creating and Editing Patch Name and Other Lists
Copying Name Lists
Assigning the Bank Select Method
Assigning Patch Names
Assigning Note Names
Assigning Controller, RPN, and NRPN Names
Assigning Note Names
A
B
C
D