Reference Guide

935
Initialization File Format
Initialization Files
VelocityBargraphFullWidth=<
0 or 1>
Boolean 0 When displaying velocity tails as bar graphs
(see above), you can specify whether the
velocity tails should be fixed at 3 pixels wide
(default), or extend the full width of the note
event. To display full-width velocity tails, add
the following line to the [WinCake] section:
VelocityBargraphFullWidth=1
PRVUseForegroundColor=<
0 or 1>
Boolean 1 The Piano Roll view and Inline Piano Roll note
event colors are based on the track color. By
default, note events use a track’s foreground
(data) color instead of the background (clip)
color.
To override this and use background colors
instead, add the following line to the
[WinCake] section:
PRVUseForegroundColor=0
PRVColorizeVelocity=
<0 or 1>
Boolean 1 By default, note events in the Piano Roll are
colorized based on velocity. Darker colors
indicate higher velocityes.
To override this and use the static track color
instead, add the following line to the
[WinCake] section:
PRVColorizeVelocity=0
MicroscopeHZoomThreshold
=<1..20>
Integer 8 By default, the Microscope mode begins
horizontal magnification when a 32nd note is
narrower than 8 pixels. This line lets you
specify the horizontal zoom threshold (1-20
pixels).
MicroscopeHZoomMax=
<2.0 - 8.0>
Integer 3.0 This line specifies the highest horizontal
magnification that will result when using
Microscope mode.
ShowClipShadow=
<0 or 1>
Boolean 0 By default, a drop shadow is not displayed on
clips in the Track view. To always display a
drop shadow on clips, add this to the
[Wincake] section: ShowClipShadow=1
Variable Type Default value What it does
Table 195.