User's Guide

104
3. Configure the Send Assistant as follows:
• Click New Bus. This will create a new reverb bus instead of routing the tracks to an existing
bus.
•Select Stereo
• In the Name box, type Reverb.
• Click Choose Effect and select Audio Effects > Sonitus:fx > Reverb.
• Make sure Pre Fader is not selected.
• Select the Show Effects Property Page check box.
• In the Bus Output list, select Master.
4. Click OK.
The Reverb property page appears.
5. Set the Reverb control to 0.0 dB and the Dry control to -Inf..
Notice that a send control named Reverb has been added to each track. To enable or disable a
send, click the On/Off button located on each track’s Send control.