User's Guide

113
Working with markers
From this dialog you can do a lot of very important things. First let’s name this marker by typing Intro
in the Name field.
Next, select the Lock to SMPTE (Real World) Time check box. This option is very important when
working with video. If a marker is not locked to SMPTE time, its position in relation to events on the
video will change with tempo and meter changes in the project.
You might also notice that the Time value changes to the SMPTE format after you selected the
check box. This determines where the location of the marker will be. We know in the video that the
sun comes out at about four seconds and ten frames into the video. Let’s set the Time value to
00:00:04:10.
Click OK to insert the marker and close the Marker dialog. You can place as many markers as you
need for a project to sync up all of your events.
The Markers view will now display the marker you just created, with the name Intro assigned to it.
The Marker view toolbar contains the following commands that apply to selected markers.
Close the Markers view now and take a look at the time ruler in SONAR, which spans the top of the
Clips pane in the Track view. You will notice there is now an orange flag named Intro indicating
where your new marker is in the project.
Control Description
Click the Delete Marker button to delete the currently selected marker.
Click the Change Marker Properties button to open the Marker dialog for the selected
marker. This is useful if you want to change the location of a marker.
Click the Lock/Unlock Marker button to lock or unlock the marker to SMTPE time.
Table 18.