Reference Guide

1228
Initialization files
Initialization file format
Variables in the [MIDI Input Devices] section
Variables in the [MIDI Output Devices] section
SysxSendPacketSize=
<num>
Integer 1024 This line specifies the number of bytes between Sysx
transmit delays. Sysx bytes are transmitted in packets,
with a 1/18 second delay between each packet.
Setting this value smaller will help slower MIDI devices
(synthesizers, etc.) avoid overflowing their internal
buffers.
UseCableMetaEvents=
<0 or 1>
Boolean 1 (enable) This line specifies whether or not SONAR should use
nonstandard “Cable” meta-events for storing Sysx
bank output number into Standard MIDI files (by
default, n=1).
Variable Type Default value What it does
MaxInPort=<num> Integer 15 (16 outputs) This variable determines the maximum number of
MIDI inputs. The value is 0 based, so a value of 15
means that the limit is 16 outputs.
Table 222.
Variable Type Default value What it does
MaxOutPort<num> Integer 15 (16 outputs) This variable determines the maximum number of
MIDI outputs. The value is 0 based, so a value of 15
means that the limit is 16 outputs.
Table 223.
Variable Type Default value What it does
Table 221. TTSseq.ini (Continued)