Reference Guide

1232
Initialization files
Initialization file format
LinkPFSendMute=<0 or 1> Boolean 0 If this is set TRUE, pre fader sends on both tracks
and buses are automatically muted when the
track/bus is muted. Also if another track is soloed
the pre fader sends on other tracks will be muted.
This basically conforms to pre SONAR 4 behavior.
DefaultEqPosition=<0 or 1> Boolean 0 The integrated channel EQ is pre effects bin by
default, but you can change the position of any
channel EQ by right-clicking the EQ plot and
choosing the desired position from the context
menu.
The DefaultEqPosition Aud.ini variable lets
you specify the default EQ position for all new
tracks/buses. This variable lives in the [Aud]
section of Aud.ini, and legal values are: 0 (pre
FX) or 1 (post FX).
BounceBufSizeMsec=
<0 to 350>
Integer 0 This is a line in the Wave section of the Aud.ini
file that sets the buffer size for bouncing tracks. At
a value of 0, the bounce buffer is the same size as
the Mixing Latency value that you set in Edit >
Preferences > Audio - Driver Settings. If you
find that bouncing tracks, especially with certain
soft synths, takes a very long time, you can set this
value to 100, or some value between 0 and 350 so
that the bounce buffer will use a more efficient size
for bouncing, which has different requirements
from normal playback latency.
Note: on larger projects, setting this variable to a
large value can cause out-of-memory errors.
Variable Type Default Value What it does
Table 224. Aud.ini (Continued)