Reference Guide

1376
Menu reference
Hide Module
This command allows you to hide track and bus modules in the Console view. You find the
command by right-clicking in the Console view in three different areas:
• For track modules, right-click in the grey area above a track’s Phase button.
• For buses, right-click in the grey area between the Send and Return knobs.
To redisplay modules, see “To choose the tracks that are displayed using the Track Manager” on
page 806, and “Configuring the Console and Track views” on page 806.
Set Snap-to = Current
This command, which you find by right-clicking a fader or knob in the Console or Track views, sets
the snap-to position of that fader or knob to its current value. When you double-click a fader or knob,
it jumps to its snap-to position.
For more information about the Console view, see “Preparing to mix” on page 804.
90 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 90 dB.
For more information about meters, see “Metering” on page 820.
78 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 78dB.
For more information about meters, see “Metering” on page 820.
60 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 60 dB.
For more information about meters, see “Metering” on page 820.