Reference Guide

1409
Menu reference
[Track view] Options > Meter Options > Track Meter
Options > Lock Peaks
This command when checked and the Hold Peaks is also checked causes the peak to be locked at
its highest point on the meter until the end of playback.
[Track view] Options > Meter Options > Bus Meter
Options > Peak
This command sets the meter to Peak.
For more information about Peak meter display, see “Metering” on page 820.
[Track view] Options > Meter Options > Bus Meter
Options > RMS
This command sets the meter to RMS.
For more information about RMS meter display, see “Metering” on page 820.
[Track view] Options > Meter Options > Bus Meter
Options > Peak + RMS
This command sets the meter to Peak + RMS.
For more information about Peak + RMS meter display, see “Metering” on page 820.
[Track view] Options > Meter Options > Bus Meter
Options > Pre Fader
This command sets the meter to measure the volume level in the signal path prior to entering the
fader.