Reference Guide

1487
Controller/Surface Settings dialog
Dialog reference
Controller/Surface Settings dialog
The Controller/Surface Settings dialog opens when you click the Add button in Edit >
Preferences > MIDI - Control Surfaces. The Controller/Surface Settings dialog also opens when
you select a control surface from the Connected Controllers/Surfaces list in the Controllers/
Surfaces dialog, and then click the Property Page button that’s in the Controllers/Surfaces dialog.
The Controller/Surface Settings dialog has the following fields:
• Control Surface. Use this field to select the control surface that you want to add to the
Connected Controllers/Surfaces list (this option is greyed-out if you open the dialog with the
Property Page button).
• Input Port. Use this field to select the MIDI port that the control surface will use to send MIDI
control data to SONAR.
• Output Port. Use this field to select the MIDI port that the control surface will use to receive
MIDI control data from SONAR.
For more information, see:
“MIDI - Control Surfaces” on page 1574
“External devices” on page 1137
Convert MIDI To Shapes dialog
Use the Track view Clips > Convert MIDI Controllers to Envelopes command to open the
Convert MIDI To Shapes dialog box. This command lets you convert a controller envelope created
in the Piano Roll view to a Track view envelope, or shape.
See:
“Creating an editing automation envelopes” on page 950
Note: If two clips overlap, the command converts the controller envelopes in both clips, in
whatever parts of the clips lie in the selected time range.