Reference Guide

1518

Groove Quantize dialog

AudioSnap Beats

Check this box if you want AudioSnap transients to be quantized.

Only Notes, Lyrics and Audio

Check this box to prevent MIDI controller, aftertouch, and xRPN data from changing.

Strength

The values in the Strength section determine how closely SONAR changes the selected notes to

match the groove’s values.

The Strength section has these fields:

• Time. Drag the slider in this field to set how closely SONAR moves the start time of the selected

notes to the groove’s start times.

• Duration. Drag the slider in this field to set how closely SONAR moves the durations of the

selected notes to the groove’s durations.

• Velocity. Drag the slider in this field to set how closely SONAR moves the velocities of the

selected notes to the groove’s velocities.

Define button

Click this button to define a new groove pattern. See “Defining a groove” on page 702.

Auto XFade Audio Clips

When quantizing audio, empty space can occur between clips. Select the Auto XFade Audio Clips

check box if you want to automatically fill in the gaps and create an automatic crossfade between

selected audio clips. Filling the gaps is accomplished automatically by “rolling out” the first clip’s right

edge and the second clip’s left edge to create a crossfade.

The following options can be specified:

• XFade. This value determines the duration of the crossfade.

• Max Gap. This value specifies the widest gap that will be filled with an automatic crossfade.