Reference Guide

Preferences dialog

The Drum Map Manager section lets you create and save drum maps for use with hardware or

software samplers. You can customize drum maps to select specific sounds on any of your

samplers.

The Drum Map Manager section contains the following settings:

Drum Maps Used in Current Project

This field displays all the currently available drum maps. click the New button to create a new drum

map and Delete to delete a drum map. Select a drum map to display the drum mappings in the

Drum Map Manager. All drum maps in this field are saved with the current project.

Presets

Presets can be used to populate the fields in the Drum Map Manager. This field is also used to save

new drum maps by entering a name in the field and clicking the Save button.

Source/Destination

The Source/Destination section is where you map the following for each In Note (source):

• In Note. The source MIDI note value.

• Out Note. The MIDI note value that plays on the destination sampler.

• Name. The user-defined name for the row.

• Channel. The channel on which the note is transmitted. There is an option to follow the track’s

Channel setting.

• Out Port. The hardware output port or software virtual output port to which you are sending the

note.

• Vel+. Apply a velocity offset setting to an individual mapped pitch.

• V Scale. The V Scale value sets a level of compression or expansion. A value below 100% is

compression. A value above 100% is expansion.

Port/Channel Pairs

This section lists each unique Port and Channel pairing. This allows you to make quick global

changes that Port and Channel pairing’s bank and patch settings.

For more information, see “Creating and editing a drum map” on page 738.