Reference Guide

1676
Missing MIDI Ports dialog
See:
“To insert a send to an existing bus” on page 818
“To insert a send to a new stereo bus” on page 819
“To insert a send to a new surround bus” on page 819
“To insert a send to a new effect bus” on page 819
“To insert a send on multiple tracks simultaneously” on page 820
Missing MIDI Ports dialog
If any assigned MIDI output devices are missing when you load a project, which is likely to happen if
you transfer projects between different computers, the Missing MIDI Ports dialog appears.
The Missing MIDI Ports dialog lets you remap missing output ports to available output ports.
Silent Buses Detected dialog
When you load a project, SONAR checks to see if the exact same output ports are assigned as
when the project was saved. SONAR’s port assignments can change if you load the project on a
different hardware configuration or change driver models. If there is any discrepancy between the
port assignments that were saved and the ports that are used in the current configuration, the ports
are set to “None” and the Silent Buses Detected dialog displays all track and bus outputs from the
current project that have been assigned to a silent output.
The Silent Buses Detected dialog also appears if any track or bus output is assigned to “None” as
a result of changing the audio configuration.
Rename Cell dialog
When you right-click a cell in the Matrix view and choose Rename Cell from the pop-up menu, the
Rename Cell dialog appears. This dialog lets you rename the cell.
See:
“Matrix view” on page 1772
Note: If you do not remap a missing device, the track’s Output control will display MISSING:
<name of missing device>. If the missing device becomes available in the future, the track will
automatically be assigned to the correct device.