Reference Guide

1761
Console view
View reference
3. Under WAI Display, select the Console View check box.
The Console view shows a color-coded bar at the bottom of any channel strips that are controlled
by your control surface. If you are using multiple control surfaces, you can assign a custom color
to each control surface. For details, see “The WAI display” on page 1158.
To show/hide a module
Click the Modules menu in the Console view and choose the desired module.
Figure 490. Console view Modules menu.
To show/hide individual channel strips
1. Click the Strips menu in the Console view and choose Track Manager to open the Track
Manager dialog.
2. Select the channel strips you want to see, then click OK.
To show/hide a channel strip type
Click the Strips menu in the Console view and choose the desired channel strip type.
Figure 491. Console view Strips menu.
To show wide or narrow channel strips
To set all channel strips to wide mode, click the Strips menu and choose Widen All Strips.
To set all channel strips to narrow mode, click the Strips menu and choose Narrow All Strips.
To toggle an individual channel strip between wide and narrow mode, right-click the channel strip
and choose Narrow Strip on the pop-up menu.
To specify meter options
Click the Options menu, point to Meters, then set the desired options.
To change a meter’s range
Right-click the meter and choose a range.
To reset meter clip indicators
To reset a single clip indicator, click the clip indicator.
To reset all clip indicators, click the Options menu, point to Meters and choose Reset All Meters.