Reference Guide

1782

View reference

Matrix view

• MIDI Learn. Use this command to assign a MIDI event to a cell, which allows you to trigger the

cell via MIDI remote control. The MIDI Learn command shows a check mark if the cell is already

in MIDI Learn mode, and shows an asterisk (*) if there is already a MIDI event assigned to the

cell.

• Clear MIDI Learn. Use this command to remove any MIDI assignment from the cell. The cell

will no longer be triggered via MIDI remote control.

In addition to a mouse, you can use the computer keyboard to navigate between cells:

• Use the ARROW keys to move focus to another cell that contains data.

• Press ENTER to trigger the cell that has focus.

• Press DELETE to clear the cell that has focus.

See:

“To assign a pattern to a cell” on page 1784

“To assign multiple patterns to subsequent columns” on page 1785

“To remove a pattern from a cell” on page 1785

“To specify how soon a pattern should start playing after being triggered” on page 1785

“To start a pattern from its beginning” on page 1786

“To synchronize a pattern with the project’s Now time” on page 1786

“To trigger a cell” on page 1787

“To trigger all cells in a column simultaneously” on page 1788

“To trigger a cell or column via MIDI remote control” on page 1789

“To configure a cell as “one-shot”” on page 1786

“To stop playing one or more cells” on page 1790

“To rename a cell” on page 1793

“To move a pattern to another cell” on page 1793

“To copy a pattern to another cell” on page 1793

“To render a single pattern to the Clips pane (Quick Capture)” on page 1794