Reference Guide

188

Controlling playback

Controlling the transport

Figure 36. The Markers module.

A. Jump to previous marker B. Jump to next marker C. Insert marker D. Current marker

To set options for punch and loop recording

1. Right-click the Record button in the Transport module to open recording settings.

2. Specify how newly recorded data should affect existing data. Choose either Sound in Sound

(Blend) or Overwrite (Replace).

3. Select between storing looped takes in a single track or storing looped takes in separate tracks.

For more information see “Loop recording” on page 281.

To use the Punch module

Figure 37. The Punch module.

A. Auto-Punch On/Off B. Set Punch Time to Select C. Punch In Time D. Punch Out Time

The Punch module contains the following controls:

• Auto-Punch on/off . Enable/disable punch recording. Toggles punch recording on/off.

• Set Punch Time to Selection . Set the Punch In time to the start (From) time of the

selection, and the Punch Out time to the end (Thru) time of the selection.

• Punch In Time. The current Punch In time. Click to modify.

• Punch Out Time. The current Punch Out time. Click to modify.

Tip:

If a numeric time field has focus, you can press G to access a list of marker positions.

A B C