Reference Guide

193
Track-by-track playback
Controlling playback
The Mix module contains the following controls:
• Mute / Unmute All Tracks . Click to mute/unmute all tracks. The button is lit if at least one
track is muted.
• Solo / Unsolo All Tracks . Click to solo/unsolo all tracks. The button is lit if at least one
track is soloed.
• Dim Solo enable/disable . Enable/disable Dim Solo mode. Dim Solo is a mode in which
non-soloed audio tracks/buses are still audible but at a reduced level. For details, see “Dim
Solo mode” on page 196.
• Exclusive Solo enable/disable . Enable/disable Exclusive Solo mode. With Exclusive
Solo mode, you can only solo one track and one bus at a time. For details, see “Exclusive Solo
mode” on page 197.
• Arm / Disarm All Tracks . Click to arm/disarm all tracks. The button is lit if at least one track
is armed.
• Input Monitor On/Off All Tracks . Enable/disable Input Monitoring on all tracks.
• Bypass all Effects . Bypass all effects globally. For details, see “Bypassing effects globally”
on page 839.
• Live Input PDC Override . Enable/disable delay compensation on live tracks, thereby
removing the latency during playback and recording of such tracks. Because it's a toggle, you can
quickly turn it on to complete your tracking at low latency, and turn it off when finished to hear the
track compensated as normal. For details, see “Live Input PDC override” on page 279.
• Allow Automation Recording . Globally enable/disable the ability to record automation.
• Global Automation Playback . Globally enable/disable all automation playback.
See:
“Silencing tracks” on page 194
“Soloing tracks” on page 195