Reference Guide

218

Controlling playback

Changing track settings

Adjusting volume and pan

The Volume and Pan settings control the initial volume and pan of a track during playback. Every

time SONAR starts playback, the Volume and Pan settings for the track are set to these initial levels.

SONAR allows you to choose different panning laws if you want (see “Configuring panning laws” on

page 219).

In some projects you want the volume or panning of a track to change while playback is in progress.

You can accomplish this by drawing a volume or pan envelope in the Track view, or by recording

automation. For more information, see “Automation” on page 945.

To set the initial volume setting

1. Move your cursor to the Volume control of the track you want to change.

2. Click and drag to the left to lower the volume or the right to raise the volume.

You can also change the volume settings in a variety of other ways, as described under “Changing

track settings in the Track pane” on page 208.

To set the initial Pan setting

1. Move your cursor to the Pan control of the track you want to change.

2. Click and drag to the left to adjust the pan to the left or to the right to adjust the pan to the right.

Hard left is 100% left. Hard right is 100% right. Pan is centered at C.

You can also change the pan and volume settings in a variety of other ways, as described under

“Changing track settings in the Track pane” on page 208.