Reference Guide

251
Creating a new project
Recording
To change your Metronome settings
1. Do one of the following to access metronome settings:
• Right-click the Playback Metronome on/off button or Record Metronome on/off button
in the Control Bar’s Transport module.
•Go to Edit > Preferences > Project - Metronome.
2. Change the metronome settings as indicated in the following table:
3. Click OK.
Your metronome settings will be saved with the project file.
To set the MIDI metronome sounds from your MIDI instrument
1. Select a track in the Track view that is assigned to the MIDI device you want to use for the
metronome sound.
2. Right-click the Playback Metronome on/off button or Record Metronome on/off button
to show metronome settings.
3. Make sure that the settings in the Port and Channel fields match those for the track in the Track
view.
4. Click on the Key box in the First Beat or the Other Beats section.
5. Play a note on your MIDI instrument. The note number is entered automatically. The velocity is
not updated.
6. Click OK.
Your metronome settings will be saved with the project file.
To do this Do this
Enable the metronome during playback Check Playback
Enable the metronome during recording Check Recording
Enable the count-in Enter the number of clicks for the count-in in the Count-in
box, and select Measures or Beats
Use the audio Check Use Audio Metronome
Use a MIDI note as the sound Check Use MIDI Note and choose the output, channel, and
other settings
Table 33.