Reference Guide

269
Arpeggiator
Recording
Using automation
You can automate the following arpeggiator parameters:
• Source Mix
• Enable/Disable
• Flam Amount
• Duration
• Latch
• Octave Range
• Pitch Offset
•Rate
• Shape
• Swing
•Velocity
To record arpeggiator automation
1. Right-click the desired arpeggiator parameter in the Track Inspector, and select Automation
Write Enable on the pop-up menu.
2. Click the Play button to start playback.
3. Adjust the arpeggiator control as desired. When you are finished recording automation, click the
Stop button to stop playback.
Automation (envelope) data appears in the Track view.
To create arpeggiator automation
• In the Track pane, click the track’s Edit Filter control, point to Track Automation > Arpeggiator
and select the desired arpeggiator parameter.
Automation (envelope) data appears in the Track view.
Tip: Existing envelopes can be reassigned to arpeggiator envelopes and vice versa. To do so, right-
click an envelope and select Assign Envelope on the context menu.