Reference Guide

338
Arranging and editing
Clip selection groups
To group clips during multitrack recording
1. Go to Edit > Preferences > Project - Record, or right-click the Record button to access
recording settings.
2. Under Clip Groups, select the Group Clips Across Tracks check box.
After recording is complete, all new clips are grouped together. When loop recording, each pass of
the loop gets placed in its own group.
Two discrete steps are placed in the Undo history. The first step is the actual recording and the
second step is for Create Clip Group. This allows you to undo the clip group, if desired, without
losing the recording.
The following example shows two takes of a five track loop recording. The first clip group is selected.
To create a clip selection group
1. Select all the clips you want to group together.
2. Right-click any selected clip and choose Create selection group from selected clips from the
pop-up menu.
A new selection group is created and the group number is displayed next to each clip name.
Note: The Group Clips Across Tracks setting is stored with each project.
Note: A clip may only belong to one selection group at a time. If any of the selected clips already
belong to another clip group, they will be removed from the other group and placed in the new
group.