Reference Guide

359
Take management and comping takes
Arranging and editing
To solo or unsolo a layer
• On the Track Scale, click the S button that’s at the same vertical level as the layer you want to
solo. You can solo one layer at a time.
Note: If you solo a layer and then disable the Show Layers feature, the Track Scale displays a
small yellow indicator to show that a hidden layer is soloed:
A. Hidden layer solo indicator
To rebuild layers
• To rebuild layers (move overlapping clips to separate layers) in a single-track, right-click the Track
Scale and choose Rebuild Layers from the pop-up menu.
• For multiple tracks, select the tracks you want to rebuild, and select the Track view Layers >
Rebuild Layers command.
To remove empty layers
• To remove empty layers in a single-track, right-click the Track Scale and choose Remove Empty
Layers from the pop-up menu.
• For multiple tracks, select the tracks you want to compact, and use the Track view Layers >
Remove Empty Layers command.
To add an empty layer to a track
• Right-click the Track Scale at the position where you want the new layer, and choose Insert
Layer from the pop-up menu.
To delete a layer from a track
• Right-click the Track Scale at the position where you want to delete a layer, and choose Delete
Layer from the pop-up menu.
To select a layer
• Right-click the Track Scale at the same vertical position where the desired layer is, and choose
Select Layer from the pop-up menu. You can de-select the layer by clicking an empty area of the
Clips pane.
A