Reference Guide

360
Arranging and editing
Take management and comping takes
To loop record multiple takes into separate track layers
1. Go to Edit > Preferences > Project - Record, or right-click the Record button to access
recording settings.
2. Under the Recording Mode options, choose Sound on Sound (Blend).
3. Under Loop Recording, choose Store Takes in a Single Track, and click OK.
4. Make sure that the armed track has its Show Layers option enabled.
5. Set your loop boundaries and start recording multiple passes through the looped area.
6. Stop recording.
When you finish recording, SONAR displays all your takes in separate layers in the recording track.
To crop overlapping clips to eliminate overlap
1. In a multi-layer track, move either the Smart tool or the Trim tool between two
overlapping clips until the cursor turns into the overlap cropping tool.
A. Overlap cropping tool
2. In the space between the clips, click the spot where you want the first clip to end and the second
one to begin. SONAR crops both clips so that they no longer overlap.
See:
“Clip muting and isolating (clip soloing)” on page 361
A