Reference Guide

386
Arranging and editing
Enhanced editing with keyboard
The most appropriate zoom method is used automatically based on the following logic:
• The default zoom method is Zoom around the selection.
• If there is no selection, the next zoom method is Zoom around the edit cursor.
Selecting with a keyboard
In Select mode, you can select either clips or time.
To enable selecting with a keyboard
1. On your QWERTY keyboard, press the NumLock key to enable NumLock mode.
2. On the numeric keypad, press 0 to enable keyboard editing.
3. On the numeric keypad, press 3 to enable Select mode.
The numeric keypad is mapped as follows:
To move the edit cursor
• In Select mode, do one of the following:
• To move to the left. Press 4.
• To move to the right. Press 6.
• To move to the previous layer or track. Press 8.
• To move to the next layer or track. Press 2.
• To center the edit cursor. Press 5.
• To move to the previous clip. Press CTRL+4.
• To move to the next clip. Press CTRL+6.
• To move to the closest clip on the previous track. Press CTRL+8.
• To move to the closest clip on the next track. Press CTRL+2.
Key Function CTRL+ ALT+
2 Move edit cursor down Move to closest clip on next
track
Select down
4 Move edit cursor left Move to previous clip Select left
5 Center edit cursor -- --
6 Move edit cursor right Move to next clip Select right
8 Move edit cursor up Move to closest clip on
previous track
Select up
Table 63.