Reference Guide

402

Tools

• “Using the Select tool on automation” on page 411

• “Using the Move tool on automation” on page 415

• “Using the Trim tool on automation” on page 419

• “Using the Freehand tool on automation” on page 428

• “Using the Line tool on automation” on page 431

• “Using the Pattern tools on automation” on page 433

• “Using the Erase tool on automation” on page 436

• “Using the Split tool on automation” on page 425

• “To select automation” on page 465

• “To move automation” on page 465

• “To draw automation freehand” on page 466

• “To draw a straight line” on page 467

• “To draw automation shapes” on page 467

• “To erase automation” on page 468

• “To add envelope nodes” on page 468

• “To draw MIDI continuous controller envelopes” on page 469

Editing AudioSnap transients

• “Working with AudioSnap transients” on page 469

• “Using the Smart tool on AudioSnap transients” on page 408

• “Using the Select tool on AudioSnap transients” on page 412

• “Using the Move tool on AudioSnap transients” on page 415

• “Using the Timing tool on AudioSnap transients” on page 422

• “Using the Freehand tool on AudioSnap transients” on page 429

• “Using the Erase tool on AudioSnap transients” on page 436

• “Using the Mute tool on AudioSnap transients” on page 440

• “To split an audio clip at transient markers” on page 471

• “To select transient markers” on page 469

• “To move transient markers (without stretching audio)” on page 470

• “To stretch transients” on page 470

• “To promote transient markers” on page 470

• “To erase transient markers” on page 470

• “To add transient” on page 471