Reference Guide

445

Snap to Grid settings

Tools

Additional Snap to Grid settings

To access additional snap settings, go to Edit > Preferences > Customization - Snap and Nudge.

The Snap section contains the following settings:

• Mode. Snapping can operate in two different modes:

• Move To. Align data to the grid.

• Move By. Move data by the grid resolution.

• Magnetic Strength. Specify the magnetic strength when snapping, which determines how

quickly moved events are pulled towards the snap grid. The choices are Off (no magnetic snap),

Low, Medium and High.

• Audio Zero Crossings. Automatically snap edited audio clips to the nearest zero crossing of

the waveform (the point at which there is no volume) to minimize glitches that can happen when

waveforms are spliced together.