Reference Guide

507
Inspectors
• To undock the Inspector. Click the Docking Options button and select Undock, or click to
the left of the Dock/Undock button and drag the Inspector to the desired location.
Figure 165. Use the Dock/Undock and Docking Options controls to change the position of the Inspector.
A. Dock/Undock B. Docking Options
To enter values in inspectors
Do one of the following:
• Type a value in the text box and press ENTER.
• Drag the slider or use the mouse wheel.
• Select/clear the check box.
• Click the arrow buttons in the inspector to increase or decrease the value.
• Click the text box and then use the UP ARROW and DOWN ARROW keys to increase or
decrease the value.
• Select a value from the drop-down menu associated with the text box.
To edit multiple tracks/clips simultaneously
You can use the Track Properties and Clip Properties inspectors to modify multiple selected tracks
or clips simultaneously. The following rules apply when modifying multiple tracks/clips:
• If the selected tracks or clips share the same value for a parameter, that parameter will display
normally.
• If the selected tracks or clips have different values for a parameter, that parameter will display as
(Multi).
• If the selected Tracks or Clips are of a different type and it would not be appropriate or possible to
modify a parameter, that parameter will be unavailable.
See:
“Track Inspector overview” on page 508
“Properties Inspector overview” on page 524:
“Properties Inspector - Clip Properties” on page 526
“Properties Inspector - Track Properties” on page 533
Tip: You can click any blank space at the top of the Inspector pane and drag the Inspector to the
desired position.
A B