Reference Guide

511
Track Inspector overview
Inspectors
Velocity offset The change in velocity (volume) that will be
applied to notes in the track on playback;
ranges from –127 to +127.
x x
Input pan Sets the pan of the audio data sent to the
bus.
x
ProChannel
(Producer
only)
ProChannel is an extended channel strip
that provides high-quality Compressor,
Equalizer, and Tube saturation processing
for each channel. See “ProChannel
(Producer only)” on page 925.
x x x
Effects bin The patch point for a track’s plug-ins or soft
synths.
xxx x
Send Enable Activates a send module, which sends a
copy of the track signal to a bus.
x x x
Send Level Controls volume of audio data sent by the
send module.
xxx
Send Pan Adjusts the send pan setting. x x x
Send Pre/
Post switch
Pre (pre-fader) means that the Send signal
goes to the bus prior to the track’s volume
fader; post means the Send signal goes to
the bus after the volume fader.
xxx
Send
destination
Displays name of bus that the Send is
sending data to.
x x x
Channel The MIDI channel through which the notes
will be played.
xx
Bank The set of patch names available for the
track.
x x
Patch The instrument sound that will be used for
playback.
xx
Phase Invert A switch that inverts the phase of the track. x
Mono/Stereo A switch that determines whether a track’s
signal enters an effect or chain of effects as
mono or stereo, regardless of the nature of
the track.
xx
Read
Automation
Enable/disable automation playback. x x x x
Write
Automation
Enable/disable automation recording. x x x x
Mute When enabled, mutes the track. x x x x x
Control Description
Audio
track
MIDI
track
Instrument
track
Bus Main
Table 112. Track Inspector controls (Continued)