Reference Guide

Drum maps and the Drum Grid pane

Creating and editing a drum map

Settings

The Settings section is where you map the following for each In Note (source):

• In Note. The source MIDI note value.

• Out Note. The MIDI note value that plays on the destination sound source.

• Name. The user-defined name for the row.

• Chn. The channel on which the note is transmitted.

• Out Port. The hardware output port or software virtual output port to which you are sending the

note.

• Vel+. Apply a velocity offset setting to an individual mapped pitch.

• V Scale. The V Scale value sets a level of compression or expansion. A value below 100% is

compression. A value above 100% is expansion. The Vel+ setting allows for gain make-up.

Ports and channels

This section lists each unique Port and Channel pairing. This allows you to make quick global

changes that Port and Channel pairing’s Bank and Patch settings.

See:

“Working in the Drum Map Manager” on page 740

Working in the Drum Map Manager

The following table lists several ways of editing settings in the Drum Map Manager.

See:

“The Drum Map Manager” on page 738

“Creating and editing a drum map” on page 738

“Working in the Drum Map Manager” on page 740

To do this Do this

Audition a row Select the row and press SHIFT+SPACEBAR

Sort rows Drag and drop a row to a new location

Select multiple rows Click a row, hold down the CTRL key while selecting additional rows

Change the Output Port for all rows

with the same Channel/Port

Press CTRL+SHIFT while changing the port.

Undo an edit

Press the Undo button

Table 146.