Reference Guide

966
Automation
Automating effects
4. Check all the parameters you want to create envelopes for; as you check each envelope choice,
you can choose a color for the envelope by clicking the Choose Color button that’s in the lower
right corner of the dialog box.
5. Click OK.
All the envelopes that you checked appear in the track or bus you were working in. You can edit
them just like any other envelopes.
See also:
“Automation” on page 945
“Quick automation guide” on page 946
“Automation methods” on page 947
“Recording automation data from an external controller” on page 967
“Automation Read and Automation Write buttons” on page 948
“Recording individual fader or knob movements” on page 949
“Creating an editing automation envelopes” on page 950
“Automating track and bus mute” on page 959
“Envelope mode and Offset mode” on page 960
“Converting MIDI controllers to envelopes” on page 963
“Snapshots” on page 964
“Automating individual effects parameters” on page 965
Note: You can change a plug-in envelope’s color whenever you want by highlighting its name
in the effect’s envelope dialog box and clicking the Choose Color button.