Reference Guide

986

Window management

Screensets

To duplicate the current screenset

SONAR can store up to 10 screensets per project. You can copy the current screenset to any other

preset location in the same project. To do so:

1. Make sure the Screenset module is visible in the Control Bar.

2. Do one of the following:

• On the Screenset menu, point to Duplicate Current Screenset to, then select the desired

screenset location (1 through 0).

• Hold down the SHIFT key and press the number key that corresponds to the target screenset

location (1 through 0).

The current screenset is copied to the specified location, and the selected location becomes the

current screenset.

To revert the current screenset to its last saved state

When you switch to another screenset, SONAR automatically saves any changes to the current

screenset (unless the screenset is locked). If you have made changes to the current screenset that

you don’t want to save, you can easily revert to the last saved state of the screenset. To do so,

perform the following steps before saving the project or selecting another screenset:

1. Make sure the Screenset module is visible in the Control Bar.

2. On the Screensets menu, select Revert Current Screenset.

The current screenset reverts to its last state before the project was saved.

See:

“Screensets” on page 982

“Control Bar overview” on page 473

“View reference” on page 1681