Reference Guide

1028 Automation
Creating and editing automation envelopes
3. Choose Delete Envelope from the menu.
SONAR deletes the envelope.
To delete several or all envelopes
1. Select the data that contains the envelopes you want to delete—you can select parts of tracks,
one or more whole tracks, or all tracks.
2. Do one of the following:
•Use the Edit > Delete Special command to open the Delete dialog box.
• Press CTRL+ALT+X or use the Edit > Cut Special command to open the Cut dialog box.
3. Select Track/Bus Automation if it’s listed.
4. Select Clip Automation if it’s listed.
5. Click OK.
SONAR deletes any track and clip envelopes that are in the data you selected.
To copy an envelope
1. In the Track view or the Clips pane, select the track or clip that has the envelope you want to
copy. If you want to copy all the automation data in the track, select the whole track.
2. Press CTRL+ALT+C or use the Edit > Copy Special command.
The Copy dialog box appears.
3. Choose Clip Automation and/or Track/Bus Automation.
4. Choose any other kinds of data you want to copy—if you only want to copy the automation data,
choose only Track/Bus Automation and/or Clip Automation.
5. Click OK.
SONAR copies the data you selected to the Clipboard.
Note 1: The basic Edit > Copy (CTRL+C) and Edit > Paste (CTRL+V) commands only apply
to the data type that is selected in the track’s Edit Filter. The Edit > Copy Special
(CTRL+ALT+C) and Edit > Paste Special (CTRL+ALT+V) commands open a dialog that lets
you specify which elements to copy/paste.
Note 2: If the Track/Bus Automation field is greyed-out, you must re-select a part of the clip
that contains either a node or a solid line (shape). A dotted line by itself is not an envelope and
can not be copied.