Reference Guide

1058 Window management

Screensets

• Hold down the CTRL key and press the number key that corresponds to the target screenset

location (1 through 0).

The current screenset is copied to the specified location, and the selected location becomes the

current screenset.

To revert the current screenset to its last saved state

When you switch to another screenset, SONAR automatically saves any changes to the current

screenset (unless the screenset is locked). If you have made changes to the current screenset that

you don’t want to save, you can easily revert to the last saved state of the screenset. To do so,

perform the following steps before saving the project or selecting another screenset:

1. Make sure the Screenset module is visible in the Control Bar.

2. On the Screensets menu, select Revert Current Screenset.

The current screenset reverts to its last state before the project was saved.

See:

“Screensets” on page 1054

“Control Bar overview” on page 495

“View reference” on page 1789