Reference Guide

1126 Instrument definitions
Creating instrument definitions
Names dialog box, and follow the directions in the following table.
See also:
“Copying name lists” on page 1127
“Assigning the Bank Select method” on page 1127
“Assigning patch names” on page 1129
“Assigning note names” on page 1130
“Assigning controller, RPN, and NRPN names” on page 1132
To do this Do this
Create a new name list Duplicate an existing Patch Names or other list by doing one of the following:
expand the folder that contains the name list, highlight the name list and press
the Ins (Insert) key; highlight the folder and press SHIFT+INSERT; or right-click
any folder or name list and choose Add Names List from the menu.
Then type a name for the list and press ENTER.
Delete a name list Highlight the names list and press the DELETE key; or right-click on the name
list and choose Delete from the menu. You will see a warning if the list is used
by any instrument definition. If you delete the list anyway, the instrument
definition will change automatically.
Add the next item in a name
list
Highlight a name and press the Ins key, or right-click on a name and choose
Add Name from the menu. Then enter the name.
Add a name anywhere in a
list
Highlight the name of a list and press SHIFT+INSERT, or right-click on the
name of a list and choose Add Name from the menu. Then enter the name.
Delete names from a list Highlight the Names List or Name, and press DELETE. You can also right-click,
then choose Delete.
Edit a name in a list Highlight the name or name list and press F2, or right-click and choose Edit
from the menu. Then enter the new name.
Table 201.