Reference Guide

118 Tutorial 2 – Using the Browser
Finding and previewing audio loops
Finding and previewing audio loops
Now that we have a general idea of how the Browser is laid out, let’s find some of the content that is
included with SONAR and give it a listen.
1. Create a new project using the Normal Template as explained in the previous tutorial titled
“Saving project files” on page 112.
2. Make sure the Browser is open and visible. If it is not, click the Views menu and choose
Browser, or press the B key.Click the Media button to show the Media Browser.
3. In the Browser, click the Content Location drop-down list and select Audio Library.
4. Double-click the Loops folder to open the folder.
5. Double-click the Loopmasters folder.
6. Double-click the ROCK AND FUNK folder.
7. Double-click the RAW POWER and click the loop named RP_Baggy_140.rx2.
The Browser should look something like the following image.
8. Click the Play button in the Browser.
The selected file is previewed.
If you don’t hear anything, revisit the settings of your Audio Preview Bus, as discussed above, and
ensure that it is set to the audio device that your headphones or speakers are connected to.
If you need to preview a lot of loops quickly, click the Media button and enable the Auto-
Preview option. When enabled, an audio loop will start playing as soon as you select it.
See:
“Previewing MIDI groove clips” on page 119
“Adding audio loops to your project” on page 120