Reference Guide

1248 Using CAL

Running CAL programs

To interrupt a CAL program while it is running, press the ESC (Escape) key. Press OK to confirm that

you want to interrupt the CAL program. As a rule, you shouldn’t interrupt a CAL program in this way

unless you suspect it is stuck in an infinite loop.

To open a CAL program

1. Select the MIDI data you want to edit.

2. Choose Process > Run CAL.

The Open dialog box appears.

3. Navigate to the folder that contains the CAL program you want to run.

4. Choose the file you want to open and click Open.

The CAL program you chose runs and modifies the selected MIDI data.

Sample CAL files

The following is a description of the sample CAL programs that come with SONAR. You can use

these programs as is or modify them to suit your own needs.

See:

“SPLIT NOTE TO TRACKS.cal” on page 1249

“SPLIT CHANNEL TO TRACKS.cal” on page 1249

“RANDOM TIME.cal” on page 1249

“THIN CONTROLLER DATA.cal” on page 1249

“THIN CHANNEL AFTERTOUCH.cal” on page 1250

“THIN PITCH WHEEL.cal” on page 1250

“MAJOR CHORD.cal, MINOR CHORD.cal” on page 1250