Reference Guide

1291
Initialization file format
Initialization files
WavePreviewInputBuffers=<
1-4> )
Integer 4 This variable allows control of the number of
Waveform preview input buffers. The input
buffers allow more efficient access to the
recorded meter history on disk, and greatly
speeds up performance access to previews
while zooming and scrolling the clips view
when waveform preview is active. You can
control the actual number of history page
buffers with this variable. This value is an
integer and the minimum value is 1 and the
default is 4 buffers. 2-4 buffers should be
sufficient for most usage scenarios. Each
buffer consumes approx 32K per preview track.
Lower values consume less memory but may
cause more disk access when scrolling or
zooming large projects when preview is active.
DrawPlayingAudio=
< 0 or 1>
Boolean 0 (disable) This line controls whether the audio waveform
is redrawn or not when the display is scrolling
during playback. By setting the value to 1, you
can force the Track view to always redisplay
audio data, even during playback. This is
recommended only for very fast machines.
ForegroundForSMPTE=<0
or 1>
Boolean 1 (enable) This line specifies whether or not SONAR
should jump to the foreground (focus) once it
locks to SMPTE.
HyphenDir=<drive:path
name>
Path <installation
directory>\ttshyph.dll
This determines the location of the Hyphenator
extension .dll used by SONAR, and is written
during installation. This should never need to
be changed.
MaxPanelUndoSteps=
<num>
Integer 128 Each StudioWare view remembers a certain
maximum number of (Design mode) operations
before discarding old ones. This line lets you
control the maximum depth of each Panel undo
history. Be aware that the larger the number
you specify, the more memory must be
dedicated to storing the information required to
undo commands.
PanelsShowWidgetBitmaps=
<0 or 1>
Boolean 1 (enable) This line controls whether SONAR hides (n=0)
or shows (n=1) all widget bitmaps while in Use
mode (except those in Image widgets).
Variable Type Default value What it does
Table 226.