Reference Guide

1297
Initialization file format
Initialization files
TTSSEQ.INI
The TTSseq.ini file can only be changed using Windows Notepad.
EnablePluginCancelButton=
<0 or 1>
Boolean 0 In SONAR 4.0.2 and earlier, opening the
property page of a VST plug-in during playback
could result in a slight disruption in playback.
The cause for this problem has its roots in the
little Cancel button that sits in the top right
corner of the plug-in's property page. The
purpose of this button is to allow the user to
cancel out of any changes they might have
made to the plug-in, restoring back to whatever
state the plug-in was in before they opened the
GUI window. To make this work, SONAR would
need to take an initial snapshot of the plug-in's
state, and some plug-ins with large amounts of
preset data could cause an audio hiccup if the
data was captured for the Cancel button.
To address this issue, SONAR 4.0.3 (and later)
does not take a snapshot of the plug-in's state
by default, and the Cancel button is not
available.
NoFontSmoothing=<0 or 1> Boolean 0 Set the value to 1 to disable font smoothing in
SONAR. You must restart SONAR in order for
the change to take effect.
Variable Type Default value What it does
Table 226.