Reference Guide

1301
Initialization file format
Initialization files
Variables in the [MIDI Input Devices] section
Variables in the [MIDI Output Devices] section
AUD.INI
To edit Aud.ini, do the following:
1. Go to Edit > Preferences > Audio - Configuration File.
2. Under Configuration Settings, click Edit Config File.
The Aud.ini file opens in the default Windows text editor.
3. Edit Aud.ini as desired.
4. Save Aud.ini and close the Windows text editor.
5. Click Reload Config Settings to reload the current audio configuration settings from Aud.ini.
SysxSendPacketSize=
<num>
Integer 1024 This line specifies the number of bytes between Sysx
transmit delays. Sysx bytes are transmitted in packets,
with a 1/18 second delay between each packet.
Setting this value smaller will help slower MIDI devices
(synthesizers, etc.) avoid overflowing their internal
buffers.
UseCableMetaEvents=
<0 or 1>
Boolean 1 (enable) This line specifies whether or not SONAR should use
nonstandard “Cable” meta-events for storing Sysx
bank output number into Standard MIDI files (by
default, n=1).
Variable Type Default value What it does
MaxInPort=<num> Integer 15 (16 outputs) This variable determines the maximum number of
MIDI inputs. The value is 0 based, so a value of 15
means that the limit is 16 outputs.
Table 228.
Variable Type Default value What it does
MaxOutPort<num> Integer 15 (16 outputs) This variable determines the maximum number of
MIDI outputs. The value is 0 based, so a value of 15
means that the limit is 16 outputs.
Table 229.
Variable Type Default value What it does
Table 227.